FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > My 3LED Cap Design

RSS >  My 3LED Cap Design
Don 'Chito' Lito #1 20/05/2008 - 04h03

Class : Apprenti
Posts : 8
Registered on : 01/05/2008

Off line

I finally got my LED's and assembled my cap.  It features rigid styrene tubing so the dimensions don't change.  I put a 9 Volt battery, on/off switch, and variable resistor in the box.  The variable resistor cost exactly the same as a 47 ohm resistor so I chose that.  The box clips on any hat with a large paper clip.  I filed the LED's flat and its seen great by FreeTrack.

Thanks to the developers of this software.  If not for this program being available, I would be stuck using a joystick hat for POV.  Now what can I use that Hat Switch for?


Posted Image
Edited by Don 'Chito' Lito on 20/05/2008 at 04h06.

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > My 3LED Cap Design

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).