FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > My Setup, and one problem., Leds position.

tomer_inbar	#1 28/04/2008 - 15h28 Top
Class : Apprenti Posts : 14 Registered on : 12/04/2008 Off line	Now, The FreeTrack softwere rank my setup because I guess it's not accurate. I've deflection of 1(+-) cm. It significant? *The measured is not accurated. It was deflected when the epoxy goes dry. Thank's Edited by tomer_inbar on 28/04/2008 at 15h31.
tomer_inbar	#2 29/04/2008 - 11h55 Top
Class : Apprenti Posts : 14 Registered on : 12/04/2008 Off line	Anyone?
superking200	#3 29/04/2008 - 14h09 Top
Class : Apprenti Posts : 30 Registered on : 07/02/2008 Off line	hi try to measure the final model and change the measures within freetrack!
tomer_inbar	#4 29/04/2008 - 15h55 Top
Class : Apprenti Posts : 14 Registered on : 12/04/2008 Off line	This is what I did. Now it's better but not perfect. One guy in this forum recommended to change the position of the top led, and of cource to bring this value to the software. I will try to lift it up and lower it down, and I will follow the movment in the software. Thank's for now, news soon.

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).