FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > problem with the tracking device

ramiv	#1 17/01/2008 - 20h16 Top
Class : Apprenti Posts : 7 Registered on : 09/11/2007 Off line	Hello, I've built a 4 point cap tracking device using the manual and it works pretty good if I tilt my head only in few degrees but it not good anoth.. I use regular infra red led that I've bought on electronics shop. I have seen your FAQ but did not understand what to do... may be you can explain it batter and if there is a picture of how should I treat the led it would be even batter... yours Rami
Deimos	#2 18/01/2008 - 17h35 Top
Class : Beta Tester Posts : 120 Registered on : 07/11/2007 Off line	There you go: That's the LED with its top filed down flat - used to be a regular dome-topped one. Use a file or a sandpaper, leave at least 1mm of plastic left above the metal parts of the LED, and don't bother with polishing the surface. When it's matte, it will disperse the light, farther improving tracking with larger head movements. Edited by Deimos on 18/01/2008 at 17h36.

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).