> Trust wb 1400 t 11 fps?
|
|
|
rui cunha |
|
Class : Apprenti
Posts : 11
Registered on : 09/01/2008
Off line
|
Anyone has this camera working with 30 fps i only get 11 fps no matter what i change.
if i cannot get 30 fps ill get back to store to change the camera [ again ], wich camera should i buy?
|
|
Kestrel |
|
Class : Webmaster (admin)
Posts : 780
Registered on : 13/07/2007
Off line
|
Can you disable auto exposure? If you can't, look at the Software FAQ under: 'My webcam's Auto-Exposure (AE) is on but the option is greyed out so I can't turn it off!'
Compatible webcams:
http://www.free-track.net/english/hardware/webcam.php |
|
rui cunha |
|
Class : Apprenti
Posts : 11
Registered on : 09/01/2008
Off line
|
Yes i always put Ae on 0, but the fps stays always the same, my leds are red not IR.
Tell me 1 cam that you know it works easy with 30 fps
|
|
Kestrel |
|
Class : Webmaster (admin)
Posts : 780
Registered on : 13/07/2007
Off line
|
And you've tried different USB ports? Sharing ports or hubs with other devices can cause a bandwidth bottleneck and lower fps.
|
|
rui cunha |
|
Class : Apprenti
Posts : 11
Registered on : 09/01/2008
Off line
|
changed port i get 13 fps.
Friend has a Labtec webcamlive pro, he installed freetrack and got instantly 32 fps on the cam, he is goin to give me his cam.
Hope it works thanks.
|
|
Rein |
|
Class : Apprenti
Posts : 11
Registered on : 05/08/2007
Off line
|
I have no trouble getting the 30 fps with this Trust cam. You have to remove the IR-filter. That's the little piece of glass that's in the lens when you screw it out of the webcam. However; it's a piece of crap that will not work good. It has a strange stutter that I can't get away. My IR leds are bright but when moved the 4 indicators in Freetrack are stuttering and the movement on screen isn't fluid.
Next to that, the viewing angle is very small. Cam isnt't that bad overall. Just not for FT.
|
|
skeemo |
|
Class : Apprenti
Posts : 19
Registered on : 13/08/2007
Off line
|
I also got this cam today.
Before that i used a modded Eyetoy Camera, which was very good, but sucked in terms of getting it attached to my TFT..lol.
Anyway i got a WB 1400 for about 5 EUR on Ebay to give it a try, cause there were some good voices over the Freetrack page.
Also there are no vista64 drivers for the eyetoy cam, so with a look into the future I installed the Trust Cam.
But.....well...i also got 12 FPS max. Even after Tweaking around a bit, modding the Cam (no IR Filter anymore) there is nothing to get out of the cam.
What can i do else ?
|
|
skeemo |
|
Class : Apprenti
Posts : 19
Registered on : 13/08/2007
Off line
|
Back again 
I visited the TRUST Driver Page again and discovered that there are :
1st : Two different models of the WB1400T, i have the one with the Item
Number 14382-02.
2nd : Then, for the 14382-xx there are two drivers. One is especially for the -02,
which is the one i used initially.
BUT : I downloaded and istalled the other one (the "not -02" =) ) and yeeahhh i got back to 30 FPS
So all with the low FPS on WB1400T just change your drivers
c ya |
|
Bert2000 |
|
Class : Apprenti
Posts : 2
Registered on : 24/08/2008
Off line
|
Hi.
Where can i find the Driver 14382-01?
I searched on the Trust Webside in 2 Languages, but i cant find the Driver.
THX Bert
|
|
Bert2000 |
|
Class : Apprenti
Posts : 2
Registered on : 24/08/2008
Off line
|
Ok i got it.
Now it increased from 11 to 20 FPS.
Any suggestions for me?
PS: Sorry for my bad English
Greetings Bert
|
|
MIKEYMC |
|
Class : Apprenti
Posts : 41
Registered on : 27/10/2007
Off line
|
I have this camera with the IR filter taken out.
Scrollbar at the bottom to see rest of this image!
These are my settings.
In a room this bright. For darker occasions I have to edit the settings.
But I'm usually getting 30 fps and 0 jitters nearly.
Edited by MIKEYMC on 24/08/2008 at 23h19. |
|
petosko |
|
Class : Apprenti
Posts : 1
Registered on : 01/02/2009
Off line
|
I have solution, i tried freetrack V 2.1.2 and it works 
Hi, i have very low FPS too
my problem is that i can't see anything in the properties, so I can't change the exposure 
I tried to reinstall freetrack (v 2.2), tried it on Vista and XP, nothing helps
somebody knows what's the problem ?
(sorry for bad english)
Edited by petosko on 09/02/2009 at 12h34. |
|
las6 |
|
Class : Apprenti
Posts : 10
Registered on : 13/02/2009
Off line
|
Also make sure that your Framerate setting in the "Stream" dialog box isn't set to too low. Mine was set to 15fps which obviously caused some problems...
|