FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > How to cut the LED to increase it's angle?

RSS >  How to cut the LED to increase it's angle?
lukinhasb #1 18/02/2014 - 12h58

Class : Apprenti
Posts : 18
Registered on : 14/09/2009

Off line

I want to know if there's any technique for cutting the LEDs to increase it's angle, I've tried but I can't get a straight, clean cut

I'm also afraid to end up leaving it matte, making harder to light pass through
Steph #2 18/02/2014 - 19h44

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,
just file it down with a nail-file or with sand-paper like this:

Posted Image

You can polish it with fine sandpaper (800 or 1000) and toothpaste to get a real clean surface, but it's not necessary. It' works matte also.

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > How to cut the LED to increase it's angle?

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).