FreeTrack Forum
FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Eliminating shakes/jitters/jumpiness
nealius | #1 20/03/2013 - 00h41 |
Class : Apprenti Off line |
I've got FreeTrack working wonderfully (or almost wonderfully) with a TrackClip Pro, but I am running into issues when I look left/right. Despite the fact that my head is not moving, FreeTrack seems to think I am moving and the view is a bit shaky. It's exacerbated when I look down and to the right/left, to the point where I am chasing cockpit switches all over the monitor and it really slows me down.
I have tried deadzones/smoothing on the curves but it hasn't done anything. I am really lost on anything outside the curves and I would like some pointers to get me in the right direction to smooth this jerkiness out so I'm not fumbling for switches in the cockpit. |
Steph | #2 20/03/2013 - 08h40 |
Class : Moderator Off line |
Hi nealius
did you set up the "model dimensions" and "model position" ? See: http://forum.free-track.net/index.php?showtopic=3543&message=18133 |
nealius | #3 20/03/2013 - 22h54 |
Class : Apprenti Off line |
Yes, model position and model dimensions are set accurately. Everything works well except for this shakiness when I'm looking down at side panels and trying to flip switches or turn knobs. I would think that setting deadzones would eliminate the shakes but for whatever reason it doesn't work.
|
Steph | #4 20/03/2013 - 23h07 |
Class : Moderator Off line |
Hi,
set low sensitivity and half smoothing values like this: http://forum.free-track.net/index.php?showtopic=3543&message=18150 Can you copie your Profile-file *.FTP (you will find it in your Freetrack\Profiles directory) and paste it in here? |
nealius | #5 21/03/2013 - 03h32 |
Class : Apprenti Off line |
Here's my current profile. Sensitivity is already pretty low (1.0-1.3). I'll try smoothing.
|
Steph | #6 21/03/2013 - 20h30 |
Class : Moderator Off line |
Hi,
try this one out: What are your model dimensions and model positions? Spoiler[Advanced] Average=50 IgnoreBackwardZ=1 MaintainPausedData=0 RollRelativeRot=0 RelativeTransYaw=1 RelativeTransPitch=1 RelativeTransRoll=1 RelativeTransX=1 RelativeTransY=1 RelativeTransZ=1 [Sensitivity] Yaw=12000 Pitch=12000 Roll=14000 X=10000 Y=10000 Z=2000 [Smoothing] Yaw=80 Pitch=80 Roll=50 X=50 Y=50 Z=50 Zooming=120 SmoothStableMultiplier=25 SmoothRawMultiplier=25 Dynamic=15 [Inverted] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0 [AxisEnabled] Yaw=1 Pitch=1 Roll=1 X=1 Y=1 Z=1 [AxisMap] Yaw=0 Pitch=1 Roll=2 X=3 Y=4 Z=5 [YawCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [PitchCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [RollCfg] X0=0 Y0=102 X1=9 Y1=37 X2=328 Y2=44 X3=359 Y3=2 [XCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [YCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [ZCfg] X0=0 Y0=102 X1=5 Y1=36 X2=261 Y2=35 X3=320 Y3=2 [Output] MouseX=0 MouseXEnabled=1 MouseY=1 MouseYEnabled=1 MouseWheel=0 MouseWheelEnabled=0 MouseAutoPan=0 MouseAbsolute=0 MouseWheelScale=50 PPJoyControllerNumber=1 FreeTrack=1 TIR=1 Mouse=0 PPJoy=0 Keys=0 SimConnect=0 FS=0 [Mapping] Pause=Shift + F9 PauseBeep=0 PauseToggle=1 Center=Shift + F11 CenterBeep=0 CenterToggle=0 CustomCenterSet= CustomCenterSetBeep=1 CustomCenterSetToggle=1 CustomCenterReset= CustomCenterResetBeep=1 CustomCenterResetToggle=1 SmoothStable= SmoothStableBeep=1 SmoothStableToggle=1 SmoothRaw= SmoothRawBeep=1 SmoothRawToggle=1 Yaw= YawBeep=1 YawToggle=1 Pitch= PitchBeep=1 PitchToggle=1 Roll= RollBeep=1 RollToggle=1 X= XBeep=1 XToggle=1 Y= YBeep=1 YToggle=1 Z= ZBeep=1 ZToggle=1 FreeTrack= FreeTrackBeep=1 FreeTrackToggle=1 TIR= TIRBeep=1 TIRToggle=1 Mouse= MouseBeep=1 MouseToggle=1 Joystick= JoystickBeep=1 JoystickToggle=1 Keymap= KeymapBeep=1 KeymapToggle=1 SimConnect= SimConnectBeep=1 SimConnectToggle=1 ProfileA= ProfileABeep=1 ProfileAToggle=1 ProfileB= ProfileBBeep=1 ProfileBToggle=1 ProfileC= ProfileCBeep=1 ProfileCToggle=1 [OutputKeys] YawThreshold=50 YawHold=1 YawPos= YawNeg= PitchThreshold=50 PitchHold=1 PitchPos= PitchNeg= RollThreshold=50 RollHold=1 RollPos= RollNeg= XThreshold=50 XHold=1 XPos= XNeg= YThreshold=50 YHold=1 YPos= YNeg= ZThreshold=50 ZHold=1 ZPos= ZNeg= [CustomCenter] Yaw=0 Pitch=0 Roll=0 X=0 Y=0 Z=0 |
nealius | #7 21/03/2013 - 21h57 |
Class : Apprenti Off line |
I think I fixed it. I increased the smoothing on all axes to 200 and added a medium deadzone to some of the curves. It completely eliminated the shakiness, but there is a very slight delay in movement. I'm not sure if I can get rid of that or if I just have to get used to it.
I'll try that other profile and post my model dimensions when I get home. |
FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Eliminating shakes/jitters/jumpiness
> Stats
1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).
Powered by Connectix Boards 0.8.4 © 2005-2024 (8 queries, 0.017 sec)