FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  TrackIR setup issues
striker121 #1 29/11/2011 - 01h27

Class : Apprenti
Posts : 9
Registered on : 11/05/2011

Off line

My clip setup can be found here http://dl.dropbox.com/u/12161672/Photo%20May%2019%2C%209%2017%2032%20PM.jpg
Basically it's just the three LEDs and a resistor. I'm using a wiimote for the camera. The problem I'm having however is the output is NOTHING like my head motion. Left and right are fairly decent as are up and down but there is a huge rotational motion regardless of what direction I move my head. I've tried messing with model size and that seems to help a bit but the real size of (from top to bottom) 71x41x38x32mm is horrific. Any ideas on what I can try? Moving the wiimote to different angles hasn't helped me. I'd really like to start enjoying DCS A-10 :(
(Will try uploading a video to show what I mean shortly)
Edited by striker121 on 29/11/2011 at 01h28.
Blindasabat #2 29/11/2011 - 04h32

Class : Habitué
Posts : 83
Registered on : 02/05/2011

Off line

Have you checked if you are using the 'clip' point model and not the 'cap' in FreeTrack?
striker121 #3 29/11/2011 - 19h18

Class : Apprenti
Posts : 9
Registered on : 11/05/2011

Off line

It is set to clip mode and the clip is sideways on the right side of my head. I've set the offset from my head as well.
Steph #4 30/11/2011 - 11h35

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Sensivity and curves-changements doesn't change anything?
striker121 #5 02/12/2011 - 00h55

Class : Apprenti
Posts : 9
Registered on : 11/05/2011

Off line

They change plenty, but it's literally just in how it quickly/slowly/when it reacts. They won't help it track correctly. Think I'm going to re-re measure my clip. I really want to play some DCS A10 with it.
striker121 #6 02/12/2011 - 02h25

Class : Apprenti
Posts : 9
Registered on : 11/05/2011

Off line

I think I found the problem. The dimensions I input where upside down. Never noticed the small "R" for right on the side image. Works very nicely now.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).