FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  Wings of Prey - problem
prase007 #1 05/01/2010 - 13h51

Class : Apprenti
Posts : 2
Registered on : 05/01/2010

Off line

Hello. I am having problem to make free track run in Wings of Prey. I am new to this program, just yesterday I have built my 3LED cap and I have DLed 2.2 version, never used FT before, however in application all looks fine, having 30 FPS, not so much jitter and model moves pretty well, I have also tested it in last version of ArmaII and it worked well, but with Wings of Prey, I have no luck for two days already.

Could you please help me out here, what should I do to make it running ? What output interface should I use, where could be the problem ? What should I check ...

I have new versions of all drivers including DX, WoP patched ...
gonzo #2 05/01/2010 - 14h45

Class : Apprenti
Posts : 19
Registered on : 17/08/2008

Off line

for me it works just fine... is freetrack running in the backround? is it running in any other game?
prase007 #3 05/01/2010 - 15h05

Class : Apprenti
Posts : 2
Registered on : 05/01/2010

Off line

Yes, it works without any problems in ArmaII with freetrack set as output. I just start free-track and run the game and it works. With WoP it does not. Could you at least tell me, what you use as output ?
gonzo #4 06/01/2010 - 09h05

Class : Apprenti
Posts : 19
Registered on : 17/08/2008

Off line

Hi,

i dunno what you mean by output. I dont use PPJoy or anything like that. Just start it. I ll have a look at output format if i can find it when iam back home.
Rajveer #5 16/01/2010 - 17h30

Class : Apprenti
Posts : 12
Registered on : 29/08/2007

Off line

Same here I can't get it to workin WoP. I tried the method used in this thread to put TrackIRHaiku in Freetrack's folder but that didn't work either

http://forum.yuplay.com/index.php?showtopic=486
MIK3K #6 17/01/2010 - 07h10

Class : Apprenti
Posts : 11
Registered on : 10/01/2010

Off line

Please see "Rise of Flight and Wings of Prey not working" topic on the "Support:  Freetrack Software" board.  It may be of some help.

Good luck.
Freaky #7 18/01/2010 - 11h44

Class : Apprenti
Posts : 14
Registered on : 18/01/2010

Off line

Hi all,

Just built my free track device and was having the same issues in WoP i.e no tracking!!

Here's what I did, disabled UAC in windows 7 put the TrackIR dll in the freetrack folder shown on the YUPlay forum. Free Track outputs set to default.

And then when you run WoP you will get a pop up asking if you wish to add WoP to the profiles, then it starts working and working very well.

Good luck  :D
Petrov75 #8 23/03/2011 - 19h17

Class : Apprenti
Posts : 1
Registered on : 23/03/2011

Off line

Problem solved!Just replace original file in Freetrack with this one Here and voala!!!Cheers!
greeting from Bulgaria!!

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).