FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Red Blobs

RSS >  Red Blobs, Help
jerryb #1 18/09/2009 - 14h51

Class : Apprenti
Posts : 7
Registered on : 17/09/2009

Off line

Hi, I've made the hat as per instructions and sorted the camera and read the help section but I'm still getting big red blobs and cannot get three small bright spots on screen, Help please.  Thanks.
Wermut #2 01/10/2009 - 23h02

Class : Apprenti
Posts : 6
Registered on : 18/09/2009

Off line

Are you using red leds or IR leds?
Have you tried playing with the threshold in Freetrack? What about exposure settings for the webcam itself?
If you're using IR leds, do you have a visible light filter installed on your webcam to block out any ambient light that might be fighting Freetrack?
JPerro #3 03/10/2009 - 10h06

Class : Apprenti
Posts : 12
Registered on : 06/11/2008

Off line

Unheck the zoom feature in the camera propertis...you will probably have to do it every time you start freetrack
jerryb #4 07/10/2009 - 18h42

Class : Apprenti
Posts : 7
Registered on : 17/09/2009

Off line

Hi, using IR leds, yes got visible light filter and tried everything else and I do not have a zoom feature on my camera.  Still got big red blobs, if I knew how to get a picture of it I'd show you.  thanks, Jerryb.
Wermut #5 07/10/2009 - 20h11

Class : Apprenti
Posts : 6
Registered on : 18/09/2009

Off line

Perhaps you're feeding your IR leds too much and making them over-bright?
Try using a larger resister (by larger, I mean a higher ohm value)
JPerro #6 07/10/2009 - 20h47

Class : Apprenti
Posts : 12
Registered on : 06/11/2008

Off line

if you removed IR filter from camera than the lens is out of focus
jerryb #7 11/10/2009 - 19h04

Class : Apprenti
Posts : 7
Registered on : 17/09/2009

Off line

OK, refocused and now have three green lights but it's not really following my head movement, it's jumping all over the place.  What do I fiddle with next???
JPerro #8 12/10/2009 - 12h35

Class : Apprenti
Posts : 12
Registered on : 06/11/2008

Off line

Are the 3 green lights (in lower right corner) constant? Even when you move your head? If so,then you have to set appropriate sensitivity (sliders in profile tab)
deathsticks #9 13/10/2009 - 00h37

Class : Apprenti
Posts : 6
Registered on : 01/06/2009

Off line

Hi, there is a possibility you're using the wrong point model.  For example, selected the 3 point parallel model (for headphone clipping) instead of the 3 point cap model in the program.  That's what happened to me, I'm embarrassed to say.
jerryb #10 15/10/2009 - 10h16

Class : Apprenti
Posts : 7
Registered on : 17/09/2009

Off line

Very good , you spotted my deliberate mistake, now going to play with the sliders and see what happens.  Ta for the help, no doubt I'll be back with more problems soon, jerryb.

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Red Blobs

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).