FreeTrack Forum
FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Pulsing LEDs
Cyph3r | #1 24/07/2009 - 21h07 |
Class : Apprenti Off line |
Im using a wiiremote and SH485P LEDs, and in freetrack they keep pulsing/changing size very slightly, which even when im looking directly straight and dont move, the pulsings causes unwanted movement.
how do i stop it?! |
Cyph3r | #2 25/07/2009 - 00h50 |
Class : Apprenti Off line |
bump
|
benmeijer | #3 25/07/2009 - 14h58 |
Class : Habitué Off line |
In previous posts I read you are using 2xAA batteries.
what is the value for the resistors you use? are you using rechargeables? |
Cyph3r | #4 25/07/2009 - 16h35 |
Class : Apprenti Off line |
theyre SH485P LEDs
and no im using non rechargeables, duracell ultra M3. |
benmeijer | #5 25/07/2009 - 17h16 |
Class : Habitué Off line |
the value of the resistors ? 30 ohm?
|
Cyph3r | #6 26/07/2009 - 15h55 |
Class : Apprenti Off line |
yep 30 ohm.
|
hangnailme | #7 27/07/2009 - 14h19 |
Class : Apprenti Off line |
i have the same problem . wiimote + sh485p leds (20 Ohms@3V). All 3 tracking points are changing size all the time, whatever i set in the controls.
head movement in arma 2 is very spongy because of that. what can i do? |
fzfq3m | #8 27/07/2009 - 15h07 |
Class : Apprenti Off line |
|
hangnailme | #9 27/07/2009 - 15h37 |
Class : Apprenti Off line |
thx for the tip. will try that when im home from work.
|
Cyph3r | #10 27/07/2009 - 20h46 |
Class : Apprenti Off line |
yep tried that, still didnt help. |
hangnailme | #11 28/07/2009 - 15h22 |
Class : Apprenti Off line |
ok, that works for me! thank you. the points are steady now and jps dropped from over 90 to 30-45. everything is running smooth now. thank you very much! |
fzfq3m | #12 28/07/2009 - 19h24 |
Class : Apprenti Off line |
Did you try changing Threshold value? if not, try increasing it to see if that works.
BTW I was using wiimote and got almost same problem... head tracking wasn´t stable at all... I found that (at least in my case) head tracking stability was affected by the distance between the wiimote and my point model, at 6 feet is more unstable than at 3 feet. I think this is because the points are shown very close to each other when a put the wiimote 6 feet away from my point model, but it´s just a thought. |
Cyph3r | #13 01/08/2009 - 17h48 |
Class : Apprenti Off line |
Tried changing threshold, and im sitting like a foot infront of the wiimote. still pulsing |
fzfq3m | #14 03/08/2009 - 22h11 |
Class : Apprenti Off line |
I'm running out of ideas
Try using a normal webcam (without FreeTrack) or cellphone cam to check if your IR leds are steady... The next thing i can think is to make a clean freetrack install (uninstalling it, removing the freetrack folder from Program Files folder and then installing it again) Also, if you got a spare Bluetooth dongle (different model from current one) try using it instead. |
FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Pulsing LEDs
> Stats
0 user(s) connected during the last 10 minutes (0 member(s) and 0 guest(s)).
Powered by Connectix Boards 0.8.4 © 2005-2024 (8 queries, 0.015 sec)