FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Building 3 point model

RSS > Building 3 point model

Cyph3r	#1 18/07/2009 - 22h02 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	Hey all, I'm going to build a 3 point setup to clip onto my headphones, I'm going to get the SFH485P LEDs, and 30ohm resistors to use with 2x AA batteries. But i wanted to ask, would this wire be good to wire it all together? http://uk.farnell.com/pro-power/rrp-t-104-pk2/wire-tinned-copper-1-0-25mm-pk2/dp/1307796
Jorge.PT	#2 18/07/2009 - 22h21 Top
Class : Apprenti Posts : 40 Registered on : 29/03/2009 Off line	I would go for copper only wire, but that seems good. I used something like this:
Cyph3r	#3 18/07/2009 - 23h07 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	Yeah, the website doesnt have any of that kinda wires though or else I'd go for them. With the wiring i linked though, so it'll be ok? theyre not just bare wires are they? like they do have insulation around them right?
Jorge.PT	#4 19/07/2009 - 21h54 Top
Class : Apprenti Posts : 40 Registered on : 29/03/2009 Off line	From what I've read in that link, they have insulation and no they aren't barbed wire I believe that they are good, the tinned just means they have a protective coating from oxidation, I'm no expert but it seems good as mine. Good luck on the assembly.
Cyph3r	#5 21/07/2009 - 11h24 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	are the default sizes for the 3 point ok? I mean the sizes the program gives you are they good sizes to use? could the sizes be changed slightly and it'll still work alright?
Cyph3r	#6 21/07/2009 - 13h12 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	god dammit! the parts arrived and the wires is bare!
benmeijer	#7 21/07/2009 - 14h19 Top
Class : Habitué Posts : 208 Registered on : 19/07/2008 Off line	Use an old cable from a mouse / keyboard / telephone line / bell-wire / usb cable /networkcable and strip it.....
Cyph3r	#8 21/07/2009 - 20h06 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	benmeijer @ 21/07/2009 - 14h19 a dit: Use an old cable from a mouse / keyboard / telephone line / bell-wire / usb cable /networkcable and strip it..... alright i stripped an ethernet cable and got plenty of wire. but i put it all together, right measurements and everything, but its really twitchty, like when i look dead on, and dont move, its twitching around and makes quite big movements. also it doesnt seems to track very well, like when i look DIRECTLY up, it looks up, but moves to the left and rotates slightly. can anyone help please?
mrclean816	#9 22/07/2009 - 02h29 Top
Class : Apprenti Posts : 44 Registered on : 18/06/2009 Off line	OK first off I was experiencing twitching because when I moved my input device I shook the desk that the monitor was sitting on that my webcam was sitting on. Shaky cam = bad. Try changing your sensitivity to 1 instead of 3 for all your axes. Also you have to adjust your "model position" under the model tab. You have to tell freetrack where the pivot point on your setup is relative to your head. I put Horizontal -101mm, that's to the right because my led assembly is to the right of my head. You might also want to fiddle with smoothing as it makes your movement less jerky. Someone might want to sticky this.
Jorge.PT	#10 22/07/2009 - 13h06 Top
Class : Apprenti Posts : 40 Registered on : 29/03/2009 Off line	Cyph3r @ 21/07/2009 - 13h12 a dit: god dammit! the parts arrived and the wires is bare! That's strange they say in the link it as Polyurethane insulation (PU)... maybe it's transparent?
Cyph3r	#11 24/07/2009 - 13h53 Top
Class : Apprenti Posts : 13 Registered on : 04/04/2008 Off line	nope, the wire is definately 100% bare ):

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Building 3 point model

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).

> Fast reply

> Stats