FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Camera properties blank

RSS >  Camera properties blank
Viniter #1 16/06/2009 - 16h21

Class : Apprenti
Posts : 2
Registered on : 16/06/2009

Off line

When I want to set up my Camera in any other software I get window like this:
Posted Image

But when I want to open Camera Properties in FreeTrack i get just blank window:
Posted Image

I'm using camera Genius i-Look 111 and FreeTrack version 2.2.0.279.
jxeboy #2 16/06/2009 - 23h29

Class : Apprenti
Posts : 9
Registered on : 07/07/2008

Off line

I get the same. I'm downloading the older version to see if that fixes it.

~Jake
jxeboy #3 17/06/2009 - 00h40

Class : Apprenti
Posts : 9
Registered on : 07/07/2008

Off line

2.1 didn't change anything. Actually in 2.1 my camera properties window doesn't even come up.

how confusing.
~Jake
MrRocketShooZ #4 17/06/2009 - 01h22

Class : Habitué
Posts : 63
Registered on : 26/10/2008

Off line

Very odd. What webcam are you using? Did you try updating its drivers?
Viniter #5 18/06/2009 - 22h49

Class : Apprenti
Posts : 2
Registered on : 16/06/2009

Off line

As I mentioned, I was using Genius i-Look 111. Pretty weird webcam though... It took me some time to find any working drivers... :D

Now I'm using my old Logitech webcam and everything is just fine...
3dSnapCom #6 27/08/2009 - 23h38

Class : Apprenti
Posts : 2
Registered on : 27/08/2009

Off line

I'm having the same problem with a GPT I-CAM 140.  I tried the trial vesion of CACHYA and had no problem with the camera properties menu so I would think there isn't a problem with the camera driver.  Anyone have another suggestion?
Rurke #7 06/09/2009 - 15h32

Class : Apprenti
Posts : 1
Registered on : 06/09/2009

Off line

Same thing with Labtec Webcam 1200. Works with Free Track 2.1 tho.
tomsk #8 26/09/2009 - 19h32

Class : Apprenti
Posts : 9
Registered on : 25/09/2009

Off line

Same with Trust WB-1400T works with FT 2.1.

This is quite a serious issue for the Trust webcam, because it resets all the settings to zero when the camera starts up. So if you can't configure it inside free track then you can't jiggle the settings to get it to pick up the LEDs. The result is that the webcam is not usable in FT 2.2.
Edited by tomsk on 01/10/2009 at 13h42.
azteca201 #9 06/01/2010 - 20h08

Class : Apprenti
Posts : 4
Registered on : 05/01/2010

Off line

I just bought a Labtec 2200 same problem here with the properties un blank, now I just download Amcap and I can work the properties from there but every restart I had to reapply everything

Will 2.1 help mi problem?
KralizecTTS #10 06/01/2010 - 21h33

Class : Apprenti
Posts : 7
Registered on : 28/12/2009

Off line

Trust 1400, same problem. Camera defaults to zero on every setting, and the setup panel is blank in FreeTrack 2.2! Everything is OK inside AMCap.

OS is Vista64
Karlos #11 25/01/2011 - 02h32

Class : Apprenti
Posts : 1
Registered on : 25/01/2011

Off line

Same with Media-Tech Z-Cam MT4029 (PixArt). Blank camera properties window, need to use Amcap to externally set camera properties every time I start Freetrack.
Both in Windows XP 32bit and Windows 7 64-bit.
user123 #12 26/01/2011 - 21h23

Class : Apprenti
Posts : 1
Registered on : 26/01/2011

Off line

+1 Bump
Same here.

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > Camera properties blank

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).