FreeTrack Forum - TrackIR setup issues

Home

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > TrackIR setup issues

RSS > TrackIR setup issues

striker121	#1 29/11/2011 - 00h27 Top
Class : Apprenti Posts : 9 Registered on : 11/05/2011 Off line	My clip setup can be found here http://dl.dropbox.com/u/12161672/Photo%20May%2019%2C%209%2017%2032%20PM.jpg Basically it's just the three LEDs and a resistor. I'm using a wiimote for the camera. The problem I'm having however is the output is NOTHING like my head motion. Left and right are fairly decent as are up and down but there is a huge rotational motion regardless of what direction I move my head. I've tried messing with model size and that seems to help a bit but the real size of (from top to bottom) 71x41x38x32mm is horrific. Any ideas on what I can try? Moving the wiimote to different angles hasn't helped me. I'd really like to start enjoying DCS A-10 (Will try uploading a video to show what I mean shortly) Edited by striker121 on 29/11/2011 at 00h28.
Blindasabat	#2 29/11/2011 - 03h32 Top
Class : Habitué Posts : 83 Registered on : 02/05/2011 Off line	Have you checked if you are using the 'clip' point model and not the 'cap' in FreeTrack?
striker121	#3 29/11/2011 - 18h18 Top
Class : Apprenti Posts : 9 Registered on : 11/05/2011 Off line	It is set to clip mode and the clip is sideways on the right side of my head. I've set the offset from my head as well.
Steph	#4 30/11/2011 - 10h35 Top
Class : Moderator Posts : 656 Registered on : 16/11/2007 Off line	Sensivity and curves-changements doesn't change anything?
striker121	#5 01/12/2011 - 23h55 Top
Class : Apprenti Posts : 9 Registered on : 11/05/2011 Off line	They change plenty, but it's literally just in how it quickly/slowly/when it reacts. They won't help it track correctly. Think I'm going to re-re measure my clip. I really want to play some DCS A10 with it.
striker121	#6 02/12/2011 - 01h25 Top
Class : Apprenti Posts : 9 Registered on : 11/05/2011 Off line	I think I found the problem. The dimensions I input where upside down. Never noticed the small "R" for right on the side image. Works very nicely now.

FreeTrack Forum > FreeTrack : English Forum > Support : FreeTrack Software > TrackIR setup issues

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).