FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > VX-3000 +IR leds

hybrid	#1 18/06/2008 - 14h54 Top
Class : Apprenti Posts : 2 Registered on : 18/06/2008 Off line	Hi, I cant turn my head much before one of the IR leds disappear so i was wondering if it would help if i removed the IR filter? The IR leds are shining bright if they point at the camera and they almost build a small halo and as fast as i turn my head they looked turned of. PS. I got a VX-3000 webcamera and i would rather not take it apart just for checking.
hybrid	#2 18/06/2008 - 15h02 Top
Class : Apprenti Posts : 2 Registered on : 18/06/2008 Off line	ah, i forgot the mention these are the IR leds that i use -> http://www.datasheetcatalog.org/datasheet/siemens/LD271HL.pdf
marcusw	#3 18/06/2008 - 19h29 Top
Class : Habitué Posts : 150 Registered on : 18/04/2008 Off line Www	Vos ist los, Hybrid! You need to file down the tops of your leds... The specs show that the beam angle is only 25 +/- degrees, so filing them down to about a milimeter or 2 above the anode and cathode will greatly increase the angle. Use a fingernail buffer after filing to buff them out to a matted gloss, but not too glossy. I hope this helps! Marcus Edited by marcusw on 18/06/2008 at 19h29. The only way to fly!!!

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).