FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Can my Active LED setup be saved!?, Veteran and all responses welcome.

TwiceDead	#1 20/05/2012 - 06h38 Top
Class : Apprenti Posts : 3 Registered on : 20/05/2012 Off line	Hello gentlemen, I have been following these forums for quite a while and have constructed my own freetrack system using a PS3Eye cam with 880DF filter and SFH285P IR LEDS. However, my layout/design for the placement of the Active LEDs, are giving me some strange results. I do not know if this results from the LED layout or just I need to put further work into the profile to get it to work. Please take a look at these images, you will see the 3 LEDs are in series, with a little project box that has switchable resistances between 6.2 and 9.2 OHM for different current and intensity, the power supply provides exactly 5.08 VDC. I don't seem to be getting much pitch or yaw response and think its the setup. Can anyone give me an ideal and best way to setup the LEDs a Clip or Hat? Any feedback welcome!
Gian92	#2 20/05/2012 - 12h19 Top
Class : Habitué Posts : 92 Registered on : 08/04/2012 Off line	TwiceDead @ 20/05/2012 - 06h38 a dit: Can anyone give me an ideal and best way to setup the LEDs a Clip or Hat? Any feedback welcome! It's simple, this pattern is totally wrong: LEDs must not be coplanar (it is also written in the various manuals). “Ordem e progresso” - Brazilian flag

> Stats

2 user(s) connected during the last 10 minutes (0 member(s) and 2 guest(s)).