FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  1 battery enough?
patio87 #1 01/12/2008 - 11h11

Class : Apprenti
Posts : 4
Registered on : 01/12/2008

Off line

Is one AA battery enough to power this with forward voltage of each of the 3 LED's being 1.2v?
babasior #2 01/12/2008 - 15h42

Webmaster (admin)
Class : Webmaster (admin)
Posts : 930
Registered on : 09/07/2007

Off line Www

No, you must use 2 AAA 1,2v battery (1800 MAH mini) if you want to have enough power for 3 leds ...

I use this kind of system ...

an answer from tristan68 (in french), about this :
http://forum.free-track.net/index.php?showtopic=1294

you must use resistance (R) with good valu ...

You can't use IR led without R - One R by Led -

If you want to test quickly, without R, try to Use Leds (no IR) from PC case box with 2 AAA (but after some hours, leds will be broken because of too many intensity (I) ...)
Edited by babasior on 01/12/2008 at 16h04.
MrRocketShooZ #3 05/12/2008 - 03h21

Class : Habitué
Posts : 63
Registered on : 26/10/2008

Off line

There's a calculator on the website where you can input all this stuff and work it out. I'd definately go for two batts though.

http://www.free-track.net/english/hardware/calcled/index.php

I use two AAAs with IR LEDs and it works well and is very light. I get about 20 hours out of each set of two. Is there any particular reason you want to use a single AA?
sorbifer #4 05/12/2008 - 08h40

Class : Apprenti
Posts : 26
Registered on : 15/10/2007

Off line

I do use 3 IR LEDS powered from ONE AAA rechargeable battery and this setup is just fine. No problems here...
MrRocketShooZ #5 12/12/2008 - 06h57

Class : Habitué
Posts : 63
Registered on : 26/10/2008

Off line

Good info. How much time do you get out of each battery approximately?

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).