FreeTrack Forum

Kinda new at this but managed to get a my 3 point hat setup and been searching the forums for awhile now and decided to just make a post to see if anybody else had this problem.

Since the Microsoft VX1000 was fairly cheap and from the recommendations figured it would be the best web to pick up cheap, but my main question is has anybody else had a problem after you used enable button and set it up your FPS did not go up? Ive tried everything and can't get the FPS to go above 20. I have played with multiple settings and options and it just wont budge even with enable button on and auto exposure is unchecked. It has been modded and has a visible light filter, since the VX1000 control panel has fairly limited options I am out of ideas, only thing i can think of is its not turning off the auto exposure even tho it says it is, I am also telling it to remember to turn it off every time. If someone could post a picture of there settings I could try to copy them and see if that works? Just a thought but still cant figure out whats wrong.  

1. Set auto exposure on (default) and exposure value to 0 (or a little higher).
2. Place a bright light source, like a lamp, in the field of view of the camera so that it reaches 30fps.
3. Disable auto exposure with one of the enable button apps.
4. Switch the light off,  the camera should still be producing 30fps and will continue to do so while the exposure settings are not changed.


it took a couple of tries but i managed to do it