FreeTrack Forum
|
Off line |
Hello Decimus
This kind of setup isn't correctly described in the documentation anyways, so you don't miss much. Just get the latest driver directly from the creative website, and look in the webcam settings to find the desired control. That's how we all did 
OK
Ok for that info, but can you tell us what current you use to drive this led ? (a led is current driven, so its brightness is highly dependant to the current flowing in it) It seems either your VL filter is too strong, either your led is underpowered. Quote : IR leds are "brighter" than normal leds. Since you already IR modded your webcam, you'll usually get better results by using an IR led than a VL led.
I presume your led is a stock red led. Those leds usually have a dome top on their case. The dome top acts like a lens to narrow the led beam. You need to sand the top flat using sandpaper to widen the led beam. Once you've solved your brightness problem, this should do the trick with your angle problems. cya |
|
Off line |
Hello Decimus
Just be sure of one thing : when you move your head , the dot must move accordingly in the cam window If thats the case , then your hardware setup and cam settings are ok If thats not the case , then you have to adjust your hardware and cam settings first. Once this is acheived , you can then look to adjust sensisitity and responsiveness on the various axis (roll and pitch for you , since you work with 1 led at this time) until you get the correct head movement. Once this is done , you can go in your game and test the settings. It should work better then  Keep us informed. cya |
> Stats
1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).