FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Games and Profiles > LOMAC Flaming Cliffs 2

Pages (2): 1 - [2]
RSS >  LOMAC Flaming Cliffs 2
JeffC #16 23/01/2011 - 20h33

Class : Apprenti
Posts : 5
Registered on : 20/01/2011

Off line

I have gotten everything to work with the exception of FC2. DCS A10 works (need to figure out how to adjust settings though) In the window in the control axis I see tracker ir section but it is blank, no inputs at all.
I have done the fixer program. It said it found and fixed but....
JeffC #17 24/01/2011 - 17h00

Class : Apprenti
Posts : 5
Registered on : 20/01/2011

Off line

Ok figured it out. Took the axis settings in setup/controls from DCS A10 and used them in FC2 and it works great.
kimberthomas #18 02/02/2011 - 11h09

Class : Apprenti
Posts : 1
Registered on : 02/02/2011

Off line

moalaska @ 07/07/2010 - 05h56 a dit:

I cant get trackirfixer to work.  I get a "mfc71.dll is missing" error.  I put the file in the /bin/x86 /stable directory.  I have windows 7 64.  does flaming cliffs 2 need to be installed in the default directory?  I have the latest patch for fc2 as well.



hi,
http://www.fix-all-dll-errors.com/mfc71d.dll/

u can go to this site...this will help in case of missing or for downloading dll's or also if there is errors in dll's..!
I also registered few dll's from this site...worked in my case :)
TINCHUS2009 #19 14/02/2012 - 14h23

Class : Apprenti
Posts : 2
Registered on : 14/02/2012

Off line

I have FC2 (latest patch), and latest version of freetrack.
freetrack is configured (only 1 led) and works great, but I have not been able to make it work with this sim. First time I run the sim after installing freetrack, I got a message from the sim saying that a new trackir interface was detected and aked me to name it. After that, the sim started normally, but no head movemment detection. I checked in the freetrack window and head movement was being tracked perfectly.
Then I dscover trackirfixer, wich I installed in the /stable directory. After I run it, no "pached file" message appeared as I have been reading, and freetrack still not working in the sim.
My system is a win 7 64 bits.

can someone tell me is Im missing something?
Thanks in advance
adam520 #20 04/03/2012 - 14h19

Class : Apprenti
Posts : 1
Registered on : 04/03/2012

Off line

I have the very same problem than TINCHUS2009.
I did not find the solution yet.
Edited by adam520 on 04/03/2012 at 14h20.
Steph #21 05/03/2012 - 16h25

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

http://forums.eagle.ru/showthread.php?t=75917

This one perhaps? :mellow:
Sparker #22 01/06/2012 - 13h06

Class : Apprenti
Posts : 2
Registered on : 01/06/2012

Off line

Burner @ 05/11/2010 - 07h27 a dit:

I have the same problem.  I eventually stopped using trackir-Z for zoom and assigned the zoom function to a button.  In DCS A-10C I do not have this problem.  Perhaps turn the z axis sensitivity down?


Hi!
I've had the same zoom problem in FC2. To make both zoom work ang game not crash if I get my head too far from the camera I changed the curves in axis settings for zoom. I changed 10 to 0, so if I get my head too far or too close it will lead to no zoom at all. It's not a great problem, at least the game doesn't freeze every time I change the distance between my head and camera too much.

I hope it will help someone!

P.S. Sorry for my English.
Pages (2): 1 - [2]

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Games and Profiles > LOMAC Flaming Cliffs 2

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).