FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > MS Lifecam VX 1000 disassembly for filter removal

Pages (2): 1 - [2]
RSS >  MS Lifecam VX 1000 disassembly for filter removal
tristan68 #16 13/09/2008 - 13h56

Electronicien en chef
Class : Electronicien en chef
Posts : 651
Registered on : 10/07/2007

Off line

hello tankbuster

I find that my the points are too bright in my modded VX-1000, and I have to have the threshold within a pixel of the right hand edge. They work best when the AA batteries are almost flat!



looks like your leds are indeed far too bright for your modded webcam, even with the VL filter.

What you can do is reduce the led current , by increasing the resistor(s).

So , your batteries will last longer and you'll find it easier to adjust since you'll work in the middle of the treshhold range , not near the edge.

What led current setting do you use currently ?

cya
Edited by tristan68 on 13/09/2008 at 13h58.
SLO_Scatter #17 01/10/2008 - 19h37

Class : Apprenti
Posts : 3
Registered on : 25/09/2008

Off line

Hi tankbuster,

Could you post some pics of your cam settings?  I'm trying to setup the VX-1000 I just got.

thanks
remoteplayer1 #18 03/10/2008 - 05h26

Class : Apprenti
Posts : 24
Registered on : 27/07/2008

Off line

jdub765 @ 08/10/2007 - 18h52 a dit:

Hold up a (transparent) glass of cola in front of the camera for an unexpected surprise  :blink:




can you get a picture of this, i am curious to see what you mean
tankbuster #19 12/10/2008 - 23h50

Class : Habitué
Posts : 66
Registered on : 28/08/2007

Off line

tristan68 @ 13/09/2008 - 11h56 a dit:

hello tankbuster

What led current setting do you use currently ?

cya



I can't remember! :) I've tried to find the receipts for the resistors, but cannot.
tankbuster #20 12/10/2008 - 23h54

Class : Habitué
Posts : 66
Registered on : 28/08/2007

Off line

SLO_Scatter @ 01/10/2008 - 17h37 a dit:

Hi tankbuster,

Could you post some pics of your cam settings?  I'm trying to setup the VX-1000 I just got.

thanks



Yes, no problem. Which bits are you looking for?

Posted Image
Edited by tankbuster on 12/10/2008 at 23h55.
Pages (2): 1 - [2]

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > MS Lifecam VX 1000 disassembly for filter removal

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).