> Easy build setup with SFH485P, Anyone can build this ! (for 5v Usb serial build see Page 2)
|
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
an usb model doesn't consume that much power.Something between 50mA(10ohm) and 75mA(6,7 ohm)This means that with that 2200mA bank you can play for days without running empty.I used a 1800mA.The only thing what can be a problem is that some of these power banks turn them selfs off if there is just a little current used.If they have a power button it is possible that it is the wrong one for your project.
|
|
sonic1000 |
|
Class : Apprenti
Posts : 6
Registered on : 30/06/2016
Off line
|
|
|
Steph |
|
Class : Moderator
Posts : 656
Registered on : 16/11/2007
Off line
|
Hi,
yes , no problem with these parts.
|
|
sonic1000 |
|
Class : Apprenti
Posts : 6
Registered on : 30/06/2016
Off line
|
|
|
sonic1000 |
|
Class : Apprenti
Posts : 6
Registered on : 30/06/2016
Off line
|
I went and got the wire, but I accidentally got a 26 gauge of the black wire instead of 22, will this hurt anything?
|
|
Steph |
|
Class : Moderator
Posts : 656
Registered on : 16/11/2007
Off line
|
No problem at all. Even the wire of an old printer cable or others do the job.
|
|
sonic1000 |
|
Class : Apprenti
Posts : 6
Registered on : 30/06/2016
Off line
|
What temperature should I set my Soldering Iron to?
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
always if you are not sure, as low as possible and see with which temperatuur the solder tin starts to melt..The best is to first try to solder two wires to eachother.The temperature you need depends on the thickness of the wire and the used soldering tin.
|
|
sonic1000 |
|
Class : Apprenti
Posts : 6
Registered on : 30/06/2016
Off line
|
Thanks for all your help, I fhinshed building my trackir clip, but the PS3Eye Camera that I got was the bad one, is there any way I can adjust it to work with ir filter still there?
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Iam afraid not, but you can always try.I also had the wrong type and wrecked it when I tried to modify it.
I had a few options:
1) buy an other ps3-eye and hope it is one I can modify or doesn't need to.
2) buy an already modified ps3-eye or only a already modified replacement lens.
http://www.trackhat.org/shop
http://www.peauproductions.com/collections/playstation-eye-accessories
I know shipping is not cheap, but you know for sure that you get a working model. |
|
LorneMalvo |
|
Class : Apprenti
Posts : 3
Registered on : 03/08/2016
Off line
|
Hi, First of all, thank you for your support. 
I live in spain and i have a lot of problems to find the SFH485P IR led. "No longer available" in all online shops.
it seems that this model is no longer manufactured. So, where can I buy this model or an alternative model of IR led?
Thank you. |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
|
|
LorneMalvo |
|
Class : Apprenti
Posts : 3
Registered on : 03/08/2016
Off line
|
Thank you. I'll try these LEDs.
|
|
Angus94 |
|
Class : Apprenti
Posts : 5
Registered on : 05/08/2016
Off line
|
i have just ordered some of the recommended IR LED's, but i could only get 1/2 watt Resistors not 1/4 watt, is this going to be an issue, they are 30 Ohm however.
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
this should not be a problem, better to have 0,5Watt instead of the desired 0,25 watt than otherwise  |