FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Newbie needs Advice :)

RSS >  Newbie needs Advice :)
Maxxxel #1 05/05/2014 - 18h59

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

So i decided to make my own Headtracker and wanted to ask some questions.

I gonna buy these LEDs: SFH485P

1. I want to mount them on my Creative HS-1200 and connect the LEDs with a switch to the battery of the Headset. What do i Need?

Specs are: Input 5V 0.5A

2. Do i have to build antlers to mount the LEDs on?

Hope we can mae it ;)
Edited by Maxxxel on 05/05/2014 at 19h10.
Steph #2 06/05/2014 - 19h13

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

have a look at this:
http://forum.free-track.net/index.php?showtopic=1856*

...be aware that the batteries do not last very long.

Yes, you need at least two arms to get correct dimensions between the LEDs.
Something like this for example:

Posted Image
Maxxxel #3 06/05/2014 - 20h13

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

yeah i know but my headset can be used with cable too.
so when i want to use tracking i just plugin the cable into the headset and so there is no energy problem.

ok so i have to build it serial...

i have to give them 50-75mA

my Headset got 0.5A = 50mA so do i have to add resistors??

and if i want to add a switch is there any problem with?
Steph #4 07/05/2014 - 17h59

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

0.5A = 500mA
...what they given is the max. current of an USB port when used exclusively by the headset.
I think it's not such a good idea to connect the mount on the headset.
If it's a wireless that recharge with USB cable it means that you got some kind of batterie charger inbuild. You have to make sure that you do not use more than 500mA when using the batterie charger and the headmount at the same time. Otherwise you risk to damage your motherboard.
Same when connecting the LEDs, wrong wired, and your motherboard is gone. You have to be sure what to do.
You can get usb power adaptor under ten bucks, (unless you already got one for your mobile or whatever), making it more simply, (no need for PTC fuse).
You need a resistor in any case.
Edited by Steph on 07/05/2014 at 18h02.
Maxxxel #5 07/05/2014 - 18h47

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

Hey Steph

ofc i got an usb adapter to charge my phone

let me look up his specs:

2.200 mAh LI-Io Accu
loads at 800mA max.

this one: http://www.pearl.de/a-PX1591-1420.shtml

which resistor do i need. tried the wizard but it wont work for me

whenever i hit enter all values disappear
Edited by Maxxxel on 07/05/2014 at 18h48.
Stormrider #6 07/05/2014 - 20h00

Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013

Off line

you are no the first who asked this and probably also not the last ;)  ;)
Posted Image
I use also a setup with a back-up battery and it works great!!! :D
Maxxxel #7 07/05/2014 - 23h01

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

thanks for the informations so i only need 3x Led and 1x Resistor.

Are there any dimensin rules for the distances between the leds? if i like to make it like on the picture Steph posted: http://imgur.com/Vpwhv0W

thats that what i like to build
Steph #8 08/05/2014 - 12h25

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Hi,

stay within this dimensions -/+20mm is fine. You can setup any deviations under model dimensions and position later on.

Posted Image

Make sure that when turning your head about 30° in any direction does not cover one of the LEDs.
Maxxxel #9 08/05/2014 - 21h44

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

thanks.


so am i right with this resistor: 0,25W 5% 6,8Ohm 0207
http://www.voelkner.de/products/30946/Kohleschichtwiderstand-0-25W-5-6r8-Bf-0207.html
Steph #10 09/05/2014 - 16h59

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Ja. ;)
Maxxxel #11 10/05/2014 - 13h40

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

THanks. your german?
Steph #12 12/05/2014 - 17h27

Class : Moderator
Posts : 656
Registered on : 16/11/2007

Off line

Yes.
Maxxxel #13 12/05/2014 - 18h50

Class : Apprenti
Posts : 8
Registered on : 05/05/2014

Off line

supi :)

hab jz alles bestellt kann ich in ca. 1 Woche abholen mal schauen wie es wird :)

 >  Fast reply

Message

FreeTrack Forum > FreeTrack : English Forum > Support : Tracking System > Newbie needs Advice :)

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).