FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Slight problem, 3 led cap

Jazzer	#1 22/11/2007 - 21h07 Top
Class : Apprenti Posts : 16 Registered on : 10/11/2007 Off line	My freetrack tracks movement very well apart from a small problem. When tracking to look left and down the skull model flips upside down and sort of freezes there. From here it won't centre and the Freetrack software has to be stopped and restarted. It doesn't seem to do it looking to the right and down. Any ideas please? J
gustav	#2 23/11/2007 - 12h05 Top
Class : Apprenti Posts : 9 Registered on : 25/10/2007 Off line	Ah, yes, the NAN error, I've had the exact same problem. I fixed it by reducing the left/right ("front") number in the setup screen from 105mm (real measured distance) to 80mm. Havent experienced the error since so try reducing by a centimeter or two, depending on your original number. Edited by gustav on 23/11/2007 at 12h14.
Jazzer	#3 23/11/2007 - 19h23 Top
Class : Apprenti Posts : 16 Registered on : 10/11/2007 Off line	Thanks for your suggestion Gustav. I've tried that and also I think the profile I was using had quite a large sensitivity difference between the yaw and the pitch and that was causing some of it. Anyway, I think its OK now. Thanks a lot. J
rador	#4 27/04/2008 - 12h17 Top
Class : Apprenti Posts : 7 Registered on : 20/10/2007 Off line	Hey that's work for me! Thank you gustav

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).