> 2.2: Very slow movement
|
|
Fire |
Class : Apprenti
Posts : 6
Registered on : 22/06/2008
Off line
|
I have some troubles with the new 2.2 Software
Even when I set the sensitivity for the axis to "3" the head movement is very very slow.
In Version 2.1 the movement was very fast even on setting "1".
In 2.2 there's nearly no movement to see.
How can I solve this?
|
didja |
Class : Webmaster (admin)
Posts : 1043
Registered on : 09/07/2007
Off line Www
|
Check you've selected the right profile (model tab).
Rémy
|
Fire |
Class : Apprenti
Posts : 6
Registered on : 22/06/2008
Off line
|
I selected the 3 Point Profile (using a cap with 3 Infrared-LED's) and entered the data.
But the problem remains: movement is very slow
|
MrRocketShooZ |
Class : Habitué
Posts : 63
Registered on : 26/10/2008
Off line
|
Did you check curves?
|
Fire |
Class : Apprenti
Posts : 6
Registered on : 22/06/2008
Off line
|
I left the curves on standard settings as I did in Freetrack 2.1
Edited by Fire on 19/12/2008 at 10h53.
|
MrRocketShooZ |
Class : Habitué
Posts : 63
Registered on : 26/10/2008
Off line
|
Try making it completely linear (so the line is straight and starts in the bottom left corner and ends in the top right corner of the box).
If that doesn't work you could try deleting freetrack.ini and any profiles so it's all rewritten freshly when you restart freetrack. Assuming all the dimensions etc for your LED construction are correct I'm not sure what else could cause it.
|
sf4JC |
Class : Apprenti
Posts : 22
Registered on : 10/09/2007
Off line
|
Also try checking your Stream Format under the FreeTrackv2.2 camera settings. Look to see that your Video Format's Frame Rate is set correctly. It happenned to me once that it was set back down to 12 or something, so I had to reset to 30.
sf4JC
|