FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Increasing LED Viewing Angle

Stas B.	#1 23/10/2008 - 19h26 Top
Class : Apprenti Posts : 11 Registered on : 30/07/2008 Off line	Well, my IR LEDs clearly aren't any good for FreeTrack, viewing-angle-wise, but I can't find anything better at the moment. I remember seeing somewhere something about widening the viewing angle, but I don't remember where, and it wasn't very clear anyway. Could someone please explain how to modify my LEDs to widen the viewing angle? Perhaps even a simple illustration picture? Thank you in advance. Stas B.
nilsca	#2 23/10/2008 - 19h37 Top
Class : Apprenti Posts : 11 Registered on : 14/10/2008 Off line	From the FAQ http://forum.free-track.net/index.php?showtopic=413 The LEDs fade away when I turn my head only a small amount. The viewing angle of your LEDs is too small, increase the viewing angle by filing the LED lens tips down flat, almost to the metal part and then make the final finish transparent matte (not too shiny, not too rough). Alternatively you can buy wide angle IR LEDs like SFH485P or equivalent (+/-40 degrees half angle). These LEDs are unlikely to be available from consumer electronics shops, instead try major distributors like Farnell and RS Components or through a specialist like LumiTronix. Take some sandpaper, spend 30 seconds and flat 'em out Cheers Nils
cadcoke4	#3 23/10/2008 - 23h57 Top
Class : Apprenti Posts : 49 Registered on : 14/08/2008 Off line	I put some transparent tape over them, (the frosted type) and it worked wonderfully. Joe Dunfee

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).