FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  2.2 VX1000 problem
Mawhinney #1 11/10/2008 - 06h34

Class : Apprenti
Posts : 6
Registered on : 11/10/2008

Off line

i have been using v2.1.2 for a long time along with win vista and everything runs fine if i set to run as admin, now iv tried this new version and it wont work.

here is the major problem im facing...
v2.2
Posted Image


while v2.1.2 works ok.
Posted Image.


thank you.
Edited by Mawhinney on 11/10/2008 at 06h35.
Mawhinney #2 11/10/2008 - 09h53

Class : Apprenti
Posts : 6
Registered on : 11/10/2008

Off line

i managed to fix this problem by using SplitCam, but now i got two programs consuming my weak CPU(a64 3800+ not the dualcore) for a single purpose.

can anyone help me?

thank you.
Habu #3 12/10/2008 - 20h43

Class : Apprenti
Posts : 35
Registered on : 10/06/2008

Off line

You can fix this issue by:

1) Open up FT2.2

2) Under the Cam tab click Stream

3) For the Output size, change it from 320x240 (default) to 320x240

that should do the trick.
Edited by Habu on 13/10/2008 at 01h55.
Mawhinney #4 14/10/2008 - 09h25

Class : Apprenti
Posts : 6
Registered on : 11/10/2008

Off line

it worked thank very much.
CommDante #5 14/12/2008 - 04h44

Class : Apprenti
Posts : 15
Registered on : 14/12/2008

Off line

Finally ...... I changed my camera resolution option ones to see if it was any better, and FreeTrack stopped tracking (white dots instead of red-with-a-cross/tracking dots. Took me ages to find this solution (Yes, did check the forum, but I guess I overlooked this one...)

Tried everything like removing drivers/cleaning register etc ... Imo you might want to put this in the readme/helpfile ;-) I thought the streaming button was a record input button >_<



Oh yeah, this stuff rocks ^_^ great job, FreeTrack peeps!
Edited by CommDante on 14/12/2008 at 04h46.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).